Führe statische Analyse (SAST) auf der Codebasis aus und suche im Datenfluss nach dem unsicheren Muster.
CWE-1320 Base Draft
Improper Protection for Outbound Error Messages and Alert Signals
This vulnerability occurs when hardware alert systems for critical conditions, like overheating or power surges, lack proper security. Untrusted software or agents can disable these warnings or…
Definition
What is CWE-1320?
This vulnerability occurs when hardware alert systems for critical conditions, like overheating or power surges, lack proper security. Untrusted software or agents can disable these warnings or trigger false alarms, preventing the system from taking protective actions.
Hardware devices use sensors to monitor safe operating limits, such as temperature or voltage. These thresholds are typically set by trusted firmware (like BIOS) or hardware fuses. When a sensor detects a dangerous out-of-bounds condition, it should generate a secure alert signal that triggers a protective response—like throttling performance or shutting down to prevent damage.
If these alert signals are not properly secured, malicious or untrusted software can interfere. Attackers can mask genuine alerts to let the hardware operate unsafely, or generate false alarms to cause performance degradation or a denial-of-service (DoS). This is commonly seen with thermal and power sensors, where compromised alerts can lead to hardware failure or reduced system availability.
Auswirkungen in der Praxis
Real-world CVEs caused by CWE-1320
Bisher sind in MITREs Katalog keine öffentlichen CVE-Referenzen mit dieser CWE verknüpft.
Wie Angreifer es ausnutzen
Angreiferpfad Schritt für Schritt
- 1
Identifiziere einen Codepfad, der nicht vertrauenswürdige Eingaben ohne Validierung verarbeitet.
- 2
Erzeuge eine Payload, die das unsichere Verhalten auslöst — Injection, Traversal, Overflow oder Logik-Missbrauch.
- 3
Liefere die Payload über einen normalen Request aus und beobachte die Reaktion der Anwendung.
- 4
Iteriere, bis die Antwort Daten preisgibt, Angreifer-Code ausführt oder Berechtigungen eskaliert.
Verwundbares Codebeispiel
Vulnerable Other
Consider a platform design where a Digital-Thermal Sensor (DTS) is used to monitor temperature and compare that output against a threshold value. If the temperature output equals or exceeds the threshold value, the DTS unit sends an alert signal to the processor. The processor, upon getting the alert, input triggers system shutdown. The alert signal is handled as a General-Purpose-I/O (GPIO) pin in input mode.
The processor-GPIO controller exposes software-programmable controls that allow untrusted software to reprogram the state of the GPIO pin. Sicheres Codebeispiel
Secure Other
Reprogramming the state of the GPIO pin allows malicious software to trigger spurious alerts or to set the alert pin to a zero value so that thermal sensor alerts are not received by the processor.
The GPIO alert-signal pin is blocked from untrusted software access and is controlled only by trusted software, such as the System BIOS. What changed: the unsafe sink is replaced (or the input is validated/escaped) so the same payload no longer triggers the weakness.
Präventions-Checkliste
How to prevent CWE-1320
- Architecture and Design Alert signals generated by critical events should be protected from access by untrusted agents. Only hardware or trusted firmware modules should be able to alter the alert configuration.
Erkennungssignale
How to detect CWE-1320
Führe dynamische Application-Security-Tests gegen den Live-Endpoint aus.
Beobachte Runtime-Logs auf ungewöhnliche Exception-Traces, fehlerhafte Eingaben oder Versuche, Autorisierung zu umgehen.
Code Review: Markiere jeden neuen Code, der Eingaben von dieser Oberfläche ohne validierte Framework-Helper verarbeitet.
CWE-1320
Don't catalog this weakness. Prove it's reachable.
Plexicus turns CWE catalogs into evidence: every CWE-pattern is matched against your real code graph, reach is proven on a sandbox clone, and verified findings ship as reviewed PRs.
Häufig gestellte Fragen Was ist CWE-1320?
Wie gravierend ist CWE-1320?
Welche Sprachen oder Plattformen sind von CWE-1320 betroffen?
Wie kann ich CWE-1320 verhindern?
Wie erkennt und behebt Plexicus CWE-1320?
Wo erfahre ich mehr über CWE-1320?
Frequently asked questions
Was ist CWE-1320?
This vulnerability occurs when hardware alert systems for critical conditions, like overheating or power surges, lack proper security. Untrusted software or agents can disable these warnings or trigger false alarms, preventing the system from taking protective actions.
Wie gravierend ist CWE-1320?
MITRE hat für diese Schwachstelle keine Exploit-Wahrscheinlichkeit veröffentlicht. Behandle sie als mittlere Auswirkung, bis dein Threat Model anderes belegt.
Welche Sprachen oder Plattformen sind von CWE-1320 betroffen?
MITRE lists the following affected platforms: Not OS-Specific, Not Architecture-Specific, System on Chip, Microcontroller Hardware, Memory Hardware, Power Management Hardware, Processor Hardware, Test/Debug Hardware.
Wie kann ich CWE-1320 verhindern?
Alert signals generated by critical events should be protected from access by untrusted agents. Only hardware or trusted firmware modules should be able to alter the alert configuration.
Wie erkennt und behebt Plexicus CWE-1320?
Die SAST-Engine von Plexicus erkennt die Datenfluss-Signatur von CWE-1320 bei jedem Commit. Bei einem Treffer öffnet unser Codex-Remedium-Agent einen Fix-PR mit korrigiertem Code, Tests und einer einzeiligen Zusammenfassung für den Reviewer.
Wo erfahre ich mehr über CWE-1320?
MITRE veröffentlicht die kanonische Definition unter https://cwe.mitre.org/data/definitions/1320.html. Für ergänzende Hinweise kannst du auch die OWASP- und NIST-Dokumentation heranziehen.
Verwandte Schwachstellen
Weaknesses related to CWE-1320
CWE-284 Parent
Improper Access Control
The software fails to properly limit who can access a resource, allowing unauthorized users or systems to interact with it.
CWE-1191 Sibling
On-Chip Debug and Test Interface With Improper Access Control
This vulnerability occurs when a hardware chip's debug or test interface (like JTAG) lacks proper access controls. Without correct…
CWE-1220 Sibling
Insufficient Granularity of Access Control
This vulnerability occurs when a system's access controls are too broad, allowing unauthorized users or processes to read or modify…
CWE-1224 Sibling
Improper Restriction of Write-Once Bit Fields
This vulnerability occurs when hardware write-once protection mechanisms, often called 'sticky bits,' are incorrectly implemented,…
CWE-1231 Sibling
Improper Prevention of Lock Bit Modification
This vulnerability occurs when hardware or firmware uses a lock bit to protect critical system registers or memory regions, but fails to…
CWE-1233 Sibling
Security-Sensitive Hardware Controls with Missing Lock Bit Protection
This vulnerability occurs when a hardware device uses a lock bit to protect critical configuration registers, but the lock fails to…
CWE-1252 Sibling
CPU Hardware Not Configured to Support Exclusivity of Write and Execute Operations
This vulnerability occurs when a CPU's hardware is not set up to enforce a strict separation between writing data to memory and executing…
CWE-1257 Sibling
Improper Access Control Applied to Mirrored or Aliased Memory Regions
This vulnerability occurs when a hardware design maps the same physical memory to multiple addresses (aliasing or mirroring) but fails to…
CWE-1259 Sibling
Improper Restriction of Security Token Assignment
This vulnerability occurs when a System-on-a-Chip (SoC) fails to properly secure its Security Token mechanism. These tokens control which…
Ressourcen
Further reading
Bereit, das Wesentliche zu validieren?
Bereit zu validieren, was zählt.
Plexicus ist Proof-Driven AppSec: validierte Funde, kontextuelles Verständnis und geprüfte Remediation — in Evidenz verankert, mit Ihnen gescoped.